Setting display and keyboard layout Instruction manual GLM-I
98 38.019.129.001 en
8
8.10 Selecting statistics display
Use this function to select which statistics is to be displayed. The function is available if
there are active statistics reports with values. The selection menu does not only include
the setting "No display" but also the active statistics reports.
Mode level: 2
<Processing> / <Weight class &statistics> / <Statistics display> /
<Select stat.- display>
Select setting and confirm.
8.11 Selecting weight indication for display and print
With this function the weight units for display and printing are defined. The following set-
tings are possible
:
– "Display in kg, print in kg"
– "Display in g, printout in g"
– "Display in kg, print up to 1 kg in g"
– "Display in g, print from 1 kg onwards in kg"
Mode level: 2
<Etc> / <Print> / <Etc> / <Print weight> / <Weight displ. displ./print>
Select setting and confirm.
8.12 Showing, hiding or deleting modified softkey texts
Some softkeys permit an individual inscription. You may switch between the modified soft-
key texts and standard inscriptions at any time. All modified inscriptions can also be de-
leted irrevocably and replaced by the standard inscription.
Rename softkeys, see page 102.
8.12.1 Showing or hiding modified softkey texts
The following settings are possible:
<No>:
Display standard inscriptions.
<Active>: Display changed softkey texts.
Mode level: 5
<Etc> / <Device operation>
Touch <Modified softkey texts> until the required setting is displayed.
To Next Page
Loading...
Need help?
General
