Instruction manual GLM-I Codes and scanning rules
38.019.129.001 en 243
19
19.11.4 Entering code structure for scanning rule
The code structure defines how the scanned characters of the barcode are interpreted.
The scanning rule may not contain more characters than the scanned
code. If the code is longer than the scanning rule
, the scanning rule
must define the handling of the remaining code digits through "Variable
rest" or "Ignore".
The scanning rule editor is open.
Press <Code structure> scanning rule editor.
The code structure editor appears.
Open selection list "Gen. code contents", see page 238.
Search code content. Enter initial letter or use search function, see page 82.
Select code content and confirm.
The code content is integrated in the code structure. Further proceeding depends on
the element type inserted
. Depending on the element the following selection lists or
input windows appear:
– Question "Contents optional?", see page 244
– Selection list "Code substr. format", see page 220
– Selection list "Nmb o.dig.in barcode", see page 221
– Selection list "Decimal place format", see page 221
– Selection list "Date format", see page 222
– "Code input editor", Entering number of digits for text elements, see page 222
– "Code input editor", Entering offsets for text numbers, see page 246
– "Code input editor", Entering key for macro request, see page 247
– "Code input editor", Entering text field for formula, see page 247
To Next Page
Loading...
Need help?
General
