Instruction manual GLM-I Texts
38.019.129.001 en 173
15
15.1.5 Inserting further control characters
The following control characters are available:
Frame on/off:
Frames the text.
Graying-out on/off:
Prints the text in gray.
Inversion on/off:
White text on black background
.
Underline on/off:
Underlines the text.
Crossing-out on/off:
Crosses out the text.
Store on/off:
Stores the text in gray.
Boldface on/off:
Shows text in bold.
Tabulator:
Sets a tabulator.
Character distance:
Sets character spacing to value entered
, max. 255 dot.
Line spacing:
Increases or reduces the line distance of the following text
around the value entered. Enter value between -128 and +127
dot.
Automatic line break:
There are three settings possible
.
– "Automatic break on": Line breaks automatically at the end
of the available text field.
– "Automatic break off": No automatic line break..
– "Fld attribute": Line break as per field-specific pre-setting in
label layout.
The control character is inserted at the beginning of the text.
This applies for the entire text.
All control characters entered in the text can be deleted in the text edi-
tor, like any other characters, with key <Clear
>.
To Next Page
Loading...
Need help?
General
