Weight classes and statistics Instruction manual GLM-I
320 38.019.129.001 en
23
23.1.11 Edit current weight class table via input assistant
An input assistant is available for standard applications that makes entering input easier by
displaying simple input windows to do so. The type of weight control that is in place deter-
mines which input is required for the weight class table. To edit the current weight class
data, you can choose from different selection criteria based. Depending on the criteria you
select, the <Package selection> function is only displayed for the respectively relevant in-
put fields. This helps to give a clear structure to how the data is edited.
The data are automatically applied to the current weight class table. If necessary, you can
also save the modified data under a weight class number in the database.
The selection criteria largely correspond to the statistics types, see page 316. There is an
icon for each selection criteria, see page 321. Once you have saved a package selection
with the help of a selection criterion, the icon for the current selection criterion is displayed
in the top left of the screen display. This enables you to see at all times what type of
weight control is being used.
You can call up the complete current weight table and edit it, see
page 313.
License "FPV" is available.
Mode level: 1
Edit current weight class via input assistant
<Etc> / <Weight class &statistics> / <Selection criteria>
Select and confirm the selection criterion, see page 321.
The selection criterion appears on the softkey.
<Etc> / <Weight class &statistics> / <Package selection>
Insert your entries, see page 321.
Exit table, see page 85.
In order to save the modified data only for the current labeling job, answer the security
check with <yes>.
or
In order to have the modified data applied to the database, answer the security check
with <Yes, also in database
>.
When applying to the database: Depending on the configuration, enter and confirm
the password for either mode level 3
(local) or mode level 4 (global).
When applying to the database: Enter and confirm the weight class number, see
page 77.
To Next Page
Loading...
Need help?
General
