Bizerba GLM-I - Save the Static Text Table; Close the Static Text Table Without Saving; Delete Static Text Table

Texts Instruction manual GLM-I
180 38.019.129.001 en
15
15.3.3 Save the static text table
The static text table is open.
<Save as ...>
or
Close table with < >. To save the table, answer the security check with <yes>.
Enter required parameter number and confirm, see page 77.
The table is saved.
If you want to save the table under the same parameter number, you
can also save and close the table with
<Save & Close> in one single
step.
15.3.4 Close the static text table without saving
The static text table is open.
<Cancel>
The table editor is closed without saving anything. Any changes that have not already
been saved are lost when the table is closed
.
15.3.5 Delete static text table
You can delete tables with static texts completely.
Mode level: 3 (local) or 4 (global)
Mode level 3: <Etc> / <Static texts> / <Del. stat. texts loc.>
or
Mode level 4: <Etc> / <Static texts> / <Del. stat. texts>
Enter parameter number and confirm, see page 77.
In order to delete the table, answer security check with <yes>.