Bizerba GLM-I - Select Totals Deletion Criteria for Total 2; Select Totals Deletion Criteria for PLU Total; Select Totals Deletion Criteria for Product Group Total

Totals Instruction manual GLM-I
292 38.019.129.001 en
22
22.6.2 Select Totals deletion criteria for Total 2
This is where you can define whether and at what mode level Total 2 is deleted when trig-
gered.
The following settings are possible:
<With delete>: Total 2 is deleted with the next single weight after printing with
Total 2.
<Without in mode 1>: – Total 2 is not printed after printing Total 2 in mode level 1.
– Total 2 is not printed after printing Total 2 in mode level 2.
<Without in modes 1 &
2>:
– Total 2 is not deleted after printing Total 2.
– Total 2 is not deleted until after the daily total has been
printed.
Mode level: 5
Select total 2 deletion criteria
<Main menu> / <Totalization> / <Total del. criterion> / <Total 2>
Press softkey with respective setting.
22.6.3 Select totals deletion criteria for PLU total
This is where you define the criteria for deleting the PLU total. The following settings are
possible:
<Clear product total>:
The PLU total is deleted with the next single weight after it has
been triggered.
<Do not clear product to-
tal>:
The PLU total is not deleted until the daily total has been trig-
gered.
Mode level: 5
<Main menu> / <Totalization> / <Total del. criterion> / <Article total>
Press softkey with respective setting.
22.6.4 Select totals deletion criteria for product group total
This is where you define the criteria for deleting the product group total. The following set-
tings are possible:
<Clear product group to-
tal>:
The product group total is deleted with the next single weight af-
ter it has been triggered.
<Do not clear prod.gr.to-
tal>:
The product group total is not deleted until the daily total has
been triggered.
Mode level: 5
<Main menu> / <Totalization> / <Total del. criterion> / <Pr. group total>
Press softkey with respective setting.