Bizerba GLM-I - Symbols Used; How Notes and Information Are Depicted

About these instructions Instruction manual GLM-I
24 38.019.129.001 en
1
1.5 Symbols used
The following symbols can be found in the manual:
Text with arrow prompts you to carry out an action.
1
Position number in figure.
<OK>
Text inside a < > refers to a key or softkey.
"Display" Text inside a " " refers to display text.
Prerequirements are displayed with a gray background.
1.5.1 How notes and information are depicted
Notes and information are depicted as follows:
Observance of these notes is mandatory.
This information is provided for greater understanding.