Instruction manual GLM-I Customer specific functions
38.019.129.001 en 125
10
10.7.7 Copy operating connection to other devices on softkey
If several devices are connected to your operating and display unit, you can copy an oper-
ating connection to a connected device on a softkey. Via the softkey you can switch to the
operation of a different device.
Define an operating connection softkey on another device that subse-
quently links to the device that was originally used
. This enables you to
switch back to operation of the originally used device.
Mode level: T
Press <2nd.> and <Record>.
Press the empty softkey you want to copy the operating connection to.
Select and confirm "Device change".
Enter and confirm the system bus address of the device to which you want to estab-
lish an operating connection
.
Enter and confirm how you want to name, or label, the softkey.
The system bus address and the softkey label you entered now appear on the softkey.
The softkey establishes an operating connection with the respective device
.
To Next Page
Loading...
Need help?
General
