To Next Page

To Previous Page

Weights and ingredients Instruction manual GLM-I

144 38.019.129.001 en

13.2 Set weight type for weight 2

If you have customer labels that include two weight fields, it is possible to print a weight in

two different types of weight. If, for example, the weight should be printed in kg in weight

field 1, weight can be printed in lb in weight field 2.

While the weight type in weight field 1 depends on the scales type, you can set the follow-

ing weight types for weight 2, independent of the scales type:

– "W/o" (no weight type, standard setting)

– "kg .0001"

– "kg ,001"

– "kg ,01"

– "kg ,1"

– "kg"

– "lb ,0001"

– "lb ,001"

– "lb ,01"

– "lb ,1"

– "lb"

Mode level: 2

Select and confirm weight type.

The setting applies from the next labeling job. It cannot be applied to the PLU data and is

not affected when the PLU changes

13.3 Switch weight type change on PLU change either on or off

You can determine whether the weight type for Weight 1 that is saved with the PLU is

called up in the event of a PLU change

The following settings are possible:

"With": When a PLU is changed, the weight type saved in the PLU data

is called up (standard setting).

"no": The weight type is not changed when the PLU is changed.

Mode level: 5

Touch softkey until required setting is achieved.

13.4 Enter fixed weight

Thi is where you can specify a fixed weight or change the fixed weight that is called up

with the PLU data. If the fixed weight is managed in the PLU data

, you can either save the

entered value simply for the current labeling job or have it applied to the PLU data.

Bizerba GLM-I User Manual

Questions and Answers: