Weight classes and statistics Instruction manual GLM-I
330 38.019.129.001 en
23
23.2.3 Releasing statistics reports manually
Statistics reports usually are released automatically after a preset initiation criteria. Based
upon the configuration they are transmitted to a printer, storage medium or EDP, see
page 328.
With the following functions the statistics reports are released manually:
<Report main stat.>: Release and delete the main statistics report.
<Report marg. stat.>: Release and delete the marginal statistics report.
<Report free stat.1>: Release and delete the report on free statistics 1.
<Report free stat.2>: Release and delete the report on free statistics 2.
After triggering the statistics data are deleted.
Mode level: 1 or 2
Mode level 1: <Etc> / <Weight class &statistics> / <Statistics report>
or
Mode level 2: <Processing> / <Weight class &statistics> / <Statistics report>
Press softkey of required report.
The statistics are triggered and deleted.
The report is only deleted after successful release. Until this has hap-
pened, the device cannot continue operations
.
To Next Page
Loading...
