Instruction manual GLM-I Weight classes and statistics
38.019.129.001 en 327
23
23.2 Statistics
23.2.1 Selecting statistics report
The following statistics are available:
–
Main statistics
– Marginal statistics
– Free statistics 1
– Free statistics 2
Main and marginal statistics are based on the same data but can be triggered independ-
ently of one another and can be created with different report templates and add-ons. Main
and marginal statistics depend on the weight classes. Upper and lower limits in these sta-
tistics are determined in the respective weight class.
The main statistic determines whether a package is accepted or not.
The marginal statistic adopts the decision made by the main statistic
.
For free statistics you can enter upper and lower limits and select report independent of
the weight class.
Use the <Select stat.- report> function to enter the following settings
:
"Lower limit": Only for free statistics: Minimum weight of packages in the unit
set for the display, see page 98. Packages under the minimum
weight are not accepted.
"Upper limit": Only for free statistics: Maximum weight of packages in the unit
set for the display, see page 98. Packages over the maximum
weight are not accepted.
"Report": As well as the "default" standard report there are up to 10 cus-
tomer-specific report templates you can choose from, see
page 332. The main and marginal statistics assigned to report
templates are adopted by the current weight class table, but are
not saved in the database.
Mode level: 2
<Processing> / <Weight class &statistics> / <Select stat.- report>
Enter desired settings.
Exit table, see page 85.
To save inputs reply to security query with <yes>.
The data are saved in the device. They are not applied to the database.
To Next Page
Loading...
Need help?
General
