Troubleshooting Instruction manual GLM-I
358 38.019.129.001 en
25
25.4.3 Redirecting service printouts
You can redirect service printouts to the following targets:
"Label printer": The device sends print jobs to the label printer. Default setting.
"List print. interface": The device sends printouts to the configured list printer.
"Only e-service": The device only sends printouts to eService. If this setting is ac-
tive, the device does not print out any more statistic reports al-
so.
Mode level: 2
<Printer + interface> / <List printer> / <Deviating print service print>
Press softkey with respective setting.
The setting is active.
25.4.4 Printing device settings
This function enables you to print selected device settings. From the selection table you
can choose the following device settings for printing
:
"Outgoing lines": This includes the connection parameters, "PSV_PCK WDout
flag", "Add.data to PSV_PCK", "Contents of PSV_DATA",
"Send if data is mod.", "Add. data to statistics".
"EDP interface": This contains the AEDP parameters, Gx-Com parameters, list
printer parameters, scanner parameters.
"Conf. data Delta prin.": Modified default settings (Delta configuration).
"Configuration": This contains the scales configuration and total configuration.
"Configuration (tables)": This includes the Ethernet address, weight class data, totals
preselection data.
"DB attribute config.": The database attribute configuration contains GGDAT, GGETI-
KET, AMPAR, GGCAB, GGSUM, GGSCAN.
"Menu tree Mode T": Menu tree for mode level T.
"Connecting multi-label-
er":
This includes printer channel control for multiple labelers.
Mode level: 5
<Service menu> / <System services> / <Service printouts> / <Print device set.>
The selection table appears showing the device settings you could print.
Select the device settings you want to print and close the table.
To start the service printout, reply to the security question with <yes>.
The device sends data to the printer that has been configured.
To Next Page
Loading...
Need help?
General
