Bizerba GLM-I User Manual

Instruction manual GLM-I Codes and scanning rules
38.019.129.001 en 229
19
19.6.3 Switch separate code string printing on or off
The code strings is printed by standard in the visible text line underneath the barcode. It
contains the barcode data in numerical form. You can print code strings or sections thereof
separately in code number fields on customer cables, see page 231.
Switch separate printing of the code string, or parts of the code string, on or off here. The
following settings are possible:
"no": Do not print selected code strings or subcode strings separately
on customer labels. Standard setting.
"PRINT": Print selected barcode codes or sub-barcodes separately on
customer labels.
Mode level: 2
<Article data> / <Code> / <CodeStr.1-7 separate?>
Tap the soft key until the required setting is highlighted.

Bizerba GLM-I Specifications

General

Brand	Bizerba
Model	GLM-I
Category	Label Maker
Language	English