Bizerba GLM-I User Manual

Installation Instruction manual GLM-I
44 38.019.129.001 en
5
5 Installation
Installation and first commissioning as well as instruction on how to operate, clean, care
and maintain the device will be carried out by the responsible BIZERBA Customer Service
or the BIZERBA specialist.
Install the device so that it is easily accessible for operation, mainte-
nance and cleaning
.
Illustration 4: Example of required space
Maintenance switch Display Operating unit
1
Front side: Working area for user. This area needs to be completely free
!
2
Left side: Provide space for respective transport units, if required for package feed.
3
Rear side: Provide sufficient space to allow swiveling of the labeler for cleaning and
maintenance purpose
.
4
Right side: Provide space for respective transport units
, if required for further trans-
port of packages.
The maintenance switch position depends on the device configuration.

Bizerba GLM-I Specifications

General

Brand	Bizerba
Model	GLM-I
Category	Label Maker
Language	English