Instruction manual GLM-I Customer specific functions
38.019.129.001 en 121
10
– Assign input cells to softkeys from a PLU data template, see page 124.
–
Assign operating calls to softkeys for other devices, see page 125.
10.7.1 Copy softkeys to mode level T
Softkeys that are assigned directly with a function and have no submenu can be copied to
the customer-specific mode level T
.
Key programming is approved, see page 102.
Select the mode level you want to copy from.
Select the menu level of the softkey you want to copy.
Press <2nd.> and <Record>.
The "Start following copying function:" menu is displayed.
Select and confirm "Copy softkey to mode T".
Press the softkey you want to copy.
The system transfers to mode level T.
Select a softkey position for the copied softkey. If you want to positioned the copied
softkey on a lower level
: press higher-ranking softkeys until the level you're looking for
appears, then press the softkey position.
If you select a softkey position that is already taken and you want to overwrite what is
allocated to this position
: "Overwrite softkey"confirm.
or
If the existing assignment should be maintained: Cancel the process with "Cancel".
To Next Page
Loading...
