Instruction manual GLM-I Accessories
38.019.129.001 en 451
31
Set reaction to scanning errors
With this setting you determine how the device should react when the scanned code does
not comply with the stipulations of the scanning rule
.
The following settings are possible:
"Dialog": After a scanning error, the operator is prompted to enter the
fault code manually.
"PckRej.": No dialog appears after a scanning error. In automatic machine
operation the package is marked as faulty package. The scan
string is not transmitted. An approval command, which is possi-
bly included in the scanning rule, is transmitted ("Release pckg.
WC" or "Release arriv. pckg.").
Mode level: 2
<Printer + interface> / <Ident scanner> / <Scan error handling>
Touch softkey until required setting is achieved.
31.13 List printer
31.13.1 Selecting printer driver
Mode level: 5
<Etc> / <List printer> / <Printer driver>
A selection list appears.
"EPSON FX80"
FX80 printer or FX80 compatible printer.
"EPSON LX300" LX300-printer or LX300 compatible printer.
"PC" Send print job to a computer.
"EPSON FX80 (re-
duced)"
Simple thermal or matrix printer with reduced scope of
function.
"GLP58" Bizerba GLP 58 industry printer.
"CUSTOM PLUS-S-0004
Standard"
Special printer driver, standard.
"CUSTOM PLUS-S-0004
BIZERBA"
Special printer driver, BIZERBA.
Select setting and press <OK>.
To Next Page
Loading...
Need help?
General
