Article data Instruction manual GLM-I
140 38.019.129.001 en
12
12.6.3 Copy reference target
Changes to the reference target have an effect on all those PLUs to which the modified
data record is allocated. If you want to change an existing parameter data record for the
currently processed PLU only, make a copy first and then save the copy under the new
parameter number and then make your changes.
PLU data table is open.
Place the cursor in the row of the table in which the reference target is to be copied
and changed
.
Press <Create copy from reference>.
Enter the parameter number for the copy or use the softkey, <Next availb. no.>, to
have it set automatically, see page
77.
If you are using a parameter number that has already been as-
signed, you will overwrite the data saved under this parameter
number.
Press <OK>.
The parameter number for the copy is assigned to the PLU attribute. Use <Edit reference>
to edit the copy, see page 139.
12.6.4 Save article data
PLU data table is open.
Editing is now finished
.
Save and close PLU data table, see page 85.
12.7 Printing list of created articles
With this function you can print a list of all articles created in the system on the header of
the labels or on the ticket rolls
.
The following settings are possible:
"Article text": Printing articles by article names in alphabetic order. This op-
tion is only available if the database has been configured ac-
cordingly.
"PLU number": Print articles sorted by PLU numbers in ascending order.
"Customer number": Print articles sorted by customer numbers in ascending order.
Mode level: 3 (local) or 4 (global)
<PLU> / <PLUs occupied>
Select setting and confirm.
A list of available articles is printed.
To Next Page
Loading...
Need help?
General
