Bizerba GLM-I User Manual

Automatic machine parameters Instruction manual GLM-I
250 38.019.129.001 en
20
20.1.1 Overview of automatic labeler parameters
The following overview shows all the possible attributes in a labeler parameter table.
Which attributes can actually be managed in your labeler parameter tables depends on
how the database is configured.
The configuration of the database is not subject of this documentation.
Please contact your Bizerba consultant or Bizerba Service for further in-
formation.
Attribute Input mode Description
Data record description Value input Name of the labeler parameter table
Label distance reference point Selection see page 257
Label position Selection see page 54
Operating mode Selection see page 264
Operating mode labeling conveyor Selection see page 264
Light barrier 1 masking section Value input see page 262
Light barrier 2/3 masking section Value input see page 262
Label distance Value input see page 256
Maximum package height Value input see page 254
Speed Value input see page 263
Transport conveyor belt speed Value input see page 263
Separation factor IB/SB Value input see page 263
Rotation angle Value input see page 259
Labeler transverse position Value input see page 252
Circumferential speed of rotary arm Value input see page 259
Package height Value input see page 258
Package width Value input see page 424
20.1.2 Defining new label parameter tables or opening tables for edit-
ing
Mode level: 3 (local) or 4 (global)
<Automat> / <Aut.labeler data loc.> (mode level 3, edit local attributes)
or

Bizerba GLM-I Specifications

General

Brand	Bizerba
Model	GLM-I
Category	Label Maker
Language	English