Bizerba GLM-I - Automatically Starting Components; Conveyor Belts

Instruction manual GLM-I Safety instructions
38.019.129.001 en 37
3
3.4.1 Automatically starting components
During operation, components may automatically switch on or off.
WARNING Automatically starting components!
During automatic operation components can switch on and off au-
tomatically.
This may result in serious injuries and damage to property
.
– Wear tight-fitting clothing and hairnet.
– Do not wear necklaces, ties etc.
– Keep fingers and hands away from movable parts.
– Switch off the device at the main switch before carrying out clean-
ing and maintenance work.
WARNING Risk of entanglement by rotating parts!
During operation, there is a risk of entanglement by rotating parts
.
This may result in serious injuries and damage to property.
– Wear tight-fitting clothing and hairnet.
– Do not wear necklaces, ties etc.
– Keep fingers and hands away from movable parts.
3.4.2 Conveyor belts
The conveyor belts can be damaged if incorrectly used.
CAUTION Objects on conveyor belts!
Possible damage to property due to objects on conveyor belt.
– Do not place any objects on conveyor belts. Do not use conveyor
belts for storage.