Instruction manual GLM-I Weight classes and statistics
38.019.129.001 en 331
23
23.2.4 Adding to statistics data
When statistics are activated, you can send the statistical evaluation via defined transmis-
sion channels to a storage media, for example, or to an EDP system or printer. The
<Add. data to statistics> function enables you to supplement the statistics report with addi-
tional data before it is sent. Various types of additional data can be assigned depending on
the chosen transmission channel.
There is an overview of the supported additional data in the annex, see
page 497.
Mode level: 5
The required transmission channels are activated
, see page 419.
<Main menu> / <Processing> / <Weight class &statistic.> / <Statistics report> /
<Add. data to statistics>
Mark the additional data you want for each transmission channel.
Columns related to transmission channels that are not available are blocked for input.
Exit table, see page 85.
To save changes, answer the security check with <yes>.
To Next Page
Loading...
Need help?
General
