Bizerba GLM-I User Manual

Instruction manual GLM-I Automatic machine parameters
38.019.129.001 en 271
20
20.13 Delays
Here you predefine the delay time for constructional package ejectors, dividers and other
outputs, after which a package needs to be ejected. The following functions are available:
<Delay infeed control>: Delay time for output infeed control.
<Delay ext. err. output>: Delay time for 1. fault output.
<Delay zeropnt.corr.>: Delay time for output zeropoint correction.
<Delay>: Delay time for output externally triggered.
<Delay ext. err. output
2>:
Delay time for 2. fault output.
<Delay pckg. eject.>: Delay time for package ejector.
<Delay divider 1> to
<Delay divider 7>:
Delay times for the dividers 1-7.
Mode level: 5
<Automat> / <Etc> / <Delays>
Select the desired function.
Enter value and confirm input.
20.14 Scale
20.14.1 Activate or deactivate tare printing
Determine here whether single tare or total tare is printed on the labels. The following set-
tings are possible
:
– "no". Default setting.
– "With"
Mode level: 5
The tare value can only be printed on 68 mm standard labels or respectively configured
customer labels.
<Etc> / <Scale menu> / <Tare> / <Tare printing>
Touch softkey until required setting is achieved.

Bizerba GLM-I Specifications

General

Brand	Bizerba
Model	GLM-I
Category	Label Maker
Language	English