Totals Instruction manual GLM-I
286 38.019.129.001 en
22
22 Totals
22.1 Set totalization type
Weight, price and number of labeled packages can be added in various total memory loca-
tions. Totalization can be performed generally
, related to the PLU or to the weight class.
By setting a totalization type you determine in which total memory location the addition is
made.
The following settings are possible:
<W/o summing up>: No totalization.
<With summing up>: Totalization in general total memory. Standard setting.
<PLU - related>: Additional totalization in total memory of PLU preselection ma-
trix, see page 299.
<Wgt class- related>: Additional totalization in total memory for the weight class-rela-
ted total preselection matrix, see page 299.
<PLU dynamic>: Additional totalization in total memory of PLU preselection ma-
trix, see page 299. In the event that a PLU is called up that is
not yet included in the PLU, the PLU preselection matrix is au-
tomatically extended to include this PLU. Once the total prese-
lection is reached and the total is triggered, it is reduced again.
When totaling in a PLU-related or weight class-related total preselection
matrix, you can switch off totalization to the general total memory loca-
tions Total 1 and Total 2, see page 299
.
You can create more totals in the customer-specific total memory loca-
tions, for example by relating them to a batch or an unloading bay
, see
page 304.
Mode level: 5
Set totalization type
<Main menu> / <Totalization> / <Totaliz. mode>
Select softkey with respective setting.
To Next Page
Loading...
