Bizerba GLM-I - Power-Driven Adjustment of the Labeler Height

Labeling systems Instruction manual GLM-I
46 38.019.129.001 en
6
6.1.2 Power-driven adjustment of the labeler height
With the power-driven adjustment the labeler can be adjusted as follows:
– Automatically upon calling the PLU or aut. labeler parameters, if the respective
package height is saved under the aut. labeler parameters.
– Manual input of package height via keyboard, see page 258.
– Manual input via softkeys, see page 254.
– Manual input via keys directly on labeler.
With the keys located on the front side of the labeler the labeler can be adjusted to the
respective package height.
Start height adjustment Upwards.
Start height adjustment Downwards.
Stop height adjustment.
Illustration 6: Operating field Labeler