Instruction manual GLM-I Interfaces
38.019.129.001 en 419
30
30.9.4 Send e-mail
The device is configured to send e-mails, see page 418.
The email address book is not empty.
Mode level: 5
<Interfaces> / <Ethernet> / <Emails> / <Send email>
Select the recipient using the cursor keys.
or
Enter the name of the recipient.
Press <OK>.
Enter the e-mail subject line.
or
Search for saved text, see page 419.
Press <Next>.
Enter the e-mail text.
or
Search for saved text, see page 419.
Press <Send email>.
The device sends the e-mail.
30.9.5 Finding saved text for e-mail
The editor for the e-mail subject line or e-mail text is open.
Press <Load>.
Enter text number and confirm, see page 77.
The text appears in the editor.
30.10 Activate or deactivate transmission channels
The following transmission channels in the device can be switched on or off, completely
independently of one another
:
– <Send channel A>
– <Send channel B>
– <Send channel C>
– <Send channel D>
– <Send channel E>
– <Internal printing> (transmission channel for internal printer)
Assignment of transmission channels is handled individually for each customer, see
page 406.
To Next Page
Loading...
Need help?
General
