Instruction manual GLM-I Processing
38.019.129.001 en 279
21
– in the top right of the screen (display field for ID and device name)
–
in the display connection table of GT-SoftControl
Mode level: 5
<Service menu> / <System services> / <Device name>
Enter and confirm the device names.
21.8 Enter production numbers
You can choose from the following production numbers:
–
Operator number, see page 279
– Batch number, see page 280
– Lot number, see page 280
21.8.1 Switch printing of the operator number on or off
To identify the operator who printed a label, you can print the operator number on the la-
bel. Do this by activating operator number printing. The following settings are possible:
– "no"
– "With"
Mode level: 2
<Etc> / <Print> / <Operator number>
Touch softkey until required setting is achieved.
21.8.2 Entering operator number
Mode level: 2
The operator number is only printed if printing of the operator number is switched on
, see
page 279.
The same data field is provided on the label for device number and operator number. If a
device number exists, this is the number that is printed. Prerequisite for printing the opera-
tor number is that no device number has been entered.
<Article data> / <Numbers + values> / <Operator number>
Enter and confirm operator number.
To Next Page
Loading...
Need help?
General
