Instruction manual GLM-I Codes and scanning rules
38.019.129.001 en 241
19
For devices that are integrated in the system network, scanning rules
can be defined locally
(only for the device) or globally (for all devices of
the network), see page 131.
For further information on working with the system network please con-
tact your Bizerba sales consultant or the Bizerba Service.
CAUTION If incorrect modifications are made, the scancodes can no longer
be read or evaluated!
Possible production failure
.
– Only make modifications to the scanning rules if you have good
knowledge of the scanning rules and the scancodes on the pack-
ages.
The following functions are available:
–
Creating scanning rule or call up for processing, see page 241
– Edit scanning rule, see page 242
– Calling up scanning rule for current labeling, see page 247
– Change current scanning rule, see page 248
– Delete scanning rule, see page 247
19.11.1 Re-creating or opening scanning rule for editing
Mode level: 3 (local) or 4 (global)
<Etc> / <Scanning rules> / <Scanning rulesEditor>
To create a new scanning rule, record new scanning rule number and confirm, see
page 77.
or
To open an existing scanning rule for editing, enter number of required scanning rule
and confirm, see page 77
.
The scanning rule editor appears.
To Next Page
Loading...
Need help?
General
