Bizerba GLM-I User Manual

Codes and scanning rules Instruction manual GLM-I
242 38.019.129.001 en
19
19.11.2 Editing and saving scanning rule
Scanning rule editor is open.
Select code type, see page 242.
Press <Code structure>.
The code structure editor appears.
Define part elements of code, see page 243.
Quit code structure editor with <Enter>.
Quit scanning rule editor with <Enter>.
To save data reply to security query with <yes>.
Enter scanning rule number and confirm, see page 77.
The scanning rule is saved in the database under the entered scanning rule number.
19.11.3 Selecting code type for scanning rule
The following settings are possible:
"Scancode":
Setting for all code types, apart from GS1-128
"Scancode GS1-128": Setting for GS1-128
Scanning rule editor is open.
Touch the field in the scanning rule editor, in which the current setting of the code
type is displayed
.
Select the required setting in window "Code family" and confirm.

Bizerba GLM-I Specifications

General

Brand	Bizerba
Model	GLM-I
Category	Label Maker
Language	English