Bizerba GLM-I User Manual

Instruction manual GLM-I Accessories
38.019.129.001 en 431
31
31.5.3 Settings
The following settings can be made for the package ejector:
–
Polarity, see page 266
– Activation criteria, see page 267
– Delay time, see page 268
– Parameter of control and container light barrier, see page 268
– Air pressure at pressure reducer
CAUTION Pressure of compressed air of the pusher too high!
Risk of injury due to a too high force at the flaps of the package
ejector.
–
Check permissible pressure of compressed air. The permissible
pressure is indicated on a plate at the pressure reducing valve.
31.6 Pusher for package ejection
A pusher can be mounted at the end of the transport unit. It is used to eject or divert pack-
ages prior to further conveying
.
Illustration 84: View: Pusher
1
Clamping lever
2
Fastening screws
3
Pressure reducing valve

Bizerba GLM-I Specifications

General

Brand	Bizerba
Model	GLM-I
Category	Label Maker
Language	English