Instruction manual GLM-I Automatic machine parameters
38.019.129.001 en 251
20
<Automat> / <A.lab.data glob.only> (mode level 4, edit global attributes)
or
<Automat> / <A.lab.data glob.+local> (mode level 4, edit local and global attributes)
To create a new label parameter table, enter and confirm a new label parameter num-
ber, see page 77.
or
To open an existing label parameter table for editing, enter and confirm the label pa-
rameter number of the desired table
, see page 77.
20.1.3 Editing labeler parameter tables
Labeler parameter tables are edited the same way as generally described for tables.
Editing table, see page
79.
Saving and closing table, see page 85.
Printing table data, see page 83.
20.1.4 Deleting labeler parameter table
This function is used to delete a labeler parameter table, see page 86.
Mode level: 3 (local) or 4 (global)
<Automat> / <Del.aut.lab. data> (mode level 3, delete locally)
or
<Automat> / <Delete A.lab.data> (mode level 4, delete globally)
Enter and confirm labeler parameter number, see page 77.
In order to irrevocably delete the labeler parameter table, answer security query with
<yes>.
20.1.5 Calling up labeler parameter tables
Usually, labeler parameter tables are assigned to the articles and are automatically called
up when the PLU is changed
. They can also be called up independently from the PLU for
the current labeling job.
Mode level: 1
Mode level 1: <Device menu> / <Etc> / <Auto.labeler param. No.>
Enter and confirm the labeler parameter number for the desired table, see page 77.
The selected labeler parameter table is called up. All the settings here included are applied
to the current labeling job
.
To Next Page
Loading...
Need help?
General
