Totals Instruction manual GLM-I
290 38.019.129.001 en
22
22.3.4 Enter special unit price for total weight
If the price is calculated from the total weight, e.g. of the box and a special unit price, enter
"Extra total unit price" here.
If the "Extra total unit price" " is 0", the price of the box, for example, is
established independently of the weight by adding up the prices of the
packages included in the box
.
Mode level: 2
<Configure total> / <Total equal.> / <Extra total unit price>
Enter value and confirm input.
22.4 Define weight total
This setting only applies to weight class-specific labeling. This is where you define which
weight is printed on total labels
. The following settings are possible:
"Print": The total of the fixed weights is printed as grand total onto the
total labels.
"W": The total of the weighed single weights is printed as grand total
onto the total labels.
Mode level: 5
<Main menu> / <Totalization> / <Weight total>
Tap the soft key until the required setting is highlighted.
22.5 Enter total tare for totals 1 to 3
It might be necessary to add the empty weight of the box, container or pallet to the calcula-
ted tare totals of the individual packages in totals 1 to 3
.
The following rules apply when forming totals:
Tare total *1:
– The tare total for total 1 is increased for each package by the tare weight of the pack-
age.
– If printing total 1 or if the preset value for total 1 is reached, a prespecified total1 tare
is added to the tare total for total 1. Total1-tare, for example, corresponds to the box
weight.
Tare total *1 = (total of single tare) + (total1-tare)
To Next Page
Loading...
