Bizerba GLM-I - Labeler Adjustment; Activating and Deactivating the Height Adjustment for Labelers; Activating and Deactivating the Transverse Adjustment for Labelers

Automatic machine parameters Instruction manual GLM-I
252 38.019.129.001 en
20
20.2 Labeler adjustment
20.2.1 Activating and deactivating the height adjustment for labelers
Possible settings:
"W/o":
The motorized height adjustment is not active. Default setting.
"With": Motorized height adjustment is active.
The motorized height adjustment for labelers is available.
Mode level: 5
<Automat> / <Optional equipment> / <Etc> / <Hgt adjust labeler>
Tap the softkey until the required setting is highlighted.
20.2.2 Activating and deactivating the transverse adjustment for la-
belers
Possible settings:
"Without/manual":
Setting for devices without motorized transverse adjustment.
"Old mechanics": Setting for "series 1" devices with motorized transverse adjust-
ment (old mechanics).
"New mechanics": Setting for "series 2" devices with motorized transverse adjust-
ment (new mechanics).
The motorized transverse adjustment for labelers is available.
Mode level: 5
<Automat> / <Optional equipment> / <Etc> / <Crosswise travel lab.>
Select setting and confirm.