Instruction manual GLM-I Date and time
38.019.129.001 en 189
16
16.2.1 Enter shelf-life days 1
With this function you enter the shelf-life days 1 for the current labeling job. If necessary,
you can have your input applied to the PLU data
.
Mode level: 2
Enter shelf-life days 1
<Date> / <Set date/ time> / <Shelf- life 1>
Enter the number of shelf-life days, or the calculated value for entering half days.
In order to save the entered value in the PLU data for the current PLU, activate the
"Save in database
" field.
Press <OK>.
16.2.2 Enter shelf-life days 2
With this function you enter the shelf-life days 2 for the current labeling job. If necessary,
you can have your input applied to the PLU data
.
Mode level: 2
Enter shelf-life days 2
<Date> / <Set date/ time> / <Shelf- life 2>
Enter the number of shelf-life days, or the calculated value for entering half days.
In order to save the entered value in the PLU data for the current PLU, activate the
"Save in database
" field.
Press <OK>.
16.3 Enter time date 1, 2, and 3
Instead of date 1, 2 or 3, providing the respective configuration is in place, you can print
the time, see page 190. Usually the system time is used here
. You can also enter the time
manually.
Example: <Time Date 1>. The procedure for <Time Date 2> and<Time Date 3> is the
same.
Mode level 2
Enter time date 1
<Date> / <Set date/ time> / <Time Date 1>
Enter and confirm time.
16.4 Enter + days
When you set the options for printing correspondingly, instead of specifying a use-by date
(date 3), you can enter the number of days from the sell
-by date the product should be
used by, e.g. "+ 5 days", see page 191. Enter the number of days you want printed for the
current labeling job instead of the use-by date.
To Next Page
Loading...
Need help?
General
