Customer specific functions Instruction manual GLM-I
108 38.019.129.001 en
10
Cancel recording
Press <Shift> and <Record>.
The macro menu appears.
Select and confirm "Abort macro".
"Save recording": select this if you want to save the previous recording,
or
"Cancel recording": select this if you want to delete the previous recording.
Press <OK>.
If you selected "Save recording": Run operating steps from "Press key", see page 106
"Record macro".
10.4.2 Add to macro
You can add more operating steps to an existing macro.
Key programming is approved, see page 102.
Macro is available in current mode level
.
Enter play delay, see page 109.
To start a macro, see page 109.
<Press Shift> and <Record> as soon as the macro reaches the part you want to add
functions to.
Select and confirm "Append recording".
The macro saves the operating procedure. While the recording is running, the screen
shows the following icon
:
.
Execute the operating steps you want to add.
Press <Shift> and <Record>.
Select and confirm "Recording end".
The continued procedure is the same as for the first recording, see page 106.
To Next Page
Loading...
Need help?
General
