Prices and currencies Instruction manual GLM-I
156 38.019.129.001 en
14
14.3.2 Print dimension and currency symbol for the unit price
Select here if you want the the weight dimension and currency symbol to be printed as well
as the Unit price.
You can have this setting saved in label parameter tables for each label
type, see page 200.
The following settings are possible:
<W/o U.Ch. CS as set>:
In double price labeling, print the unit price w/o weight dimen-
sion but with the currency symbol. In single price labeling, w/o
the dimension and w/o the currency symbol.
<With U.Ch. CS as set>: In single and double price labeling, print the unit price with
weight dimension and currency symbol. Standard setting.
<W/o U.Ch. W/o CS>: In single and double price labeling, print the unit price w/o
weight dimension and w/o the currency symbol.
Mode level: 2
<Article data> / <Price> / <Print price> / <Unit price: print/calc.> /
<UP printout U.Ch./CS>
Press softkey with respective setting.
14.3.3 Print unit price on total labels
This is where you select, if the unit price is also to be printed on the total labels. The fol-
lowing settings are possible
:
"W/o": Don't print the unit price on total labels.
"With": Print unit price on total labels.
Mode level: 2
<Article data> / <Price> / <Print price> / <Unit price: print/calc.> /
<Unit price with total>
Tap the soft key until the required setting is highlighted.
To Next Page
Loading...
Need help?
General
