Instruction manual GLM-I Maintenance
38.019.129.001 en 377
28
28.3 Cleaning
28.3.1 Cleaning information
Recommended cleaning agents Order number
Cleaning agent for windows 95 120 850 000
Cleaning pads (100 pcs.) 94 008 900 090
LR-label remover 95 943 000 000
Roller cleaner 94 008 900 088
Thermal printhead cleaning set 50 777 050 000
Cleaner for thermal printhead 400 ml 94 008 900 133
Do not use for cleaning:
–
Sharp, hard or pointed objects
– Water or steam jet devices
– Compressed air
– Chloric cleaning agents
– Cleaning agents that are hazardous to health or that contain solvents
28.3.2 Display and operating unit
Clean with a soft, lint-free, damp cloth. Do not use abrasive agents. The cleaning agent
must be compatible with foodstuffs.
28.3.3 Switch cabinet
Clean with a soft, lint-free, damp cloth. To protect against corrosion, subsequently treat
with Bizerba service oil
(96001740000).
28.3.4 Conveyor belts
Clean conveyor belts regularly with suitable cleaning agents as per cleaning and service
tables, see page 383
. Cleaning guidelines apply to all belt types.
Clean the conveyor belts carefully once they have been removed, with either brushes, a
sponge or a cloth, depending on the soiling. Do not use high-pressure cleaners and do not
drown the belts in detergent, but clean them with a solvent-friendly cloth.
Please ensure that there is sufficient ventilation and comply with the fire-protection precau-
tions.
Allow the belts to dry thoroughly after cleaning.
To Next Page
Loading...
Need help?
General
