Bizerba GLM-I - Label Data; Manage Label Parameters in Tables

Label data Instruction manual GLM-I
200 38.019.129.001 en
18
18 Label data
18.1 Manage label parameters in tables
If you are working with very different labels, you can save the settings required for specific
labels in label parameter tables
. Allocate the suitable label parameter table to a PLU via
the label parameter number. If label type changes are allowed, the label parameters as-
signed to a PLU are automatically called up when the PLU is changed, see page 136.
You can call up label parameter tables independently of the PLU, see page 203. All label
settings can be changed independently of the label parameter table for the current labeling
job.
In devices that are operating in a system network, the attributes in the
label parameter table can be defined locally
(only for the device) or
globally (for all the devices in the network), see page 131.
For further information on working with the system network please con-
tact your Bizerba sales consultant or the Bizerba Service.