To Next Page

To Previous Page

Prices and currencies Instruction manual GLM-I

154 38.019.129.001 en

Possible settings:

–

Enter fixed price only. The PLU is labeled with the fixed price.

– Enter unit price only. The PLU is labeled with the unit price and with the price calcula-

ted from the unit price and the weight.

– Enter additional special fixed price. If the special fixed price is greater than zero, the

original price is crossed out during labeling and the special fixed price is printed in ad-

dition.

– Enter additional special unit price. If the special unit price is greater than zero, the

PLU is labeled with the special unit price and also with the price calculated from the

special unit price and the weight. The original price is printed represented as a

crossed-out price.

– Activate <with calculated unit price>. Enter the end price in the "Fixed price" input

field. A unit price is recalculated from the end price and the weight. The calculated

unit price can be issued to the label, see page 155.

– Activate <With computed spec. unit price>. Enter the end price in the "Spec.fix.pr." in-

put field. A special unit price is calculated from the end price and the weight. The cal-

culated special unit price can be issued to the label, see page 155.

Mode level: 2

Enter and save values and settings

Enter values and settings.

Save table and exit, see page 85.

14.2 Unit price splitting

In the standard setting, the unit price refers to the selected weight type, for example to kg,

see page 143

. If the unit price should refer to a different quantity, you can set a different

kind of splitting for the unit price, for example 100 g.

14.2.1 Switch on/off unit price splitting

The following settings are possible:

–

"With"

– "W/o". Default setting.

Mode level: 5

Unit price splitting can only be switched on if the special price option

<Without spec. price>, is switched on, see page 151.

Tap the soft key until the required setting is highlighted.

Bizerba GLM-I User Manual

Questions and Answers: