Operation Instruction manual GLM-I
336 38.019.129.001 en
24
If you call up the article manually via the PLU number and call up the
customer number, if available
, you can search for the article by the arti-
cle text depending on the configuration, see page 142.
24.5.1 Calling up article via PLU number and customer number, if
available
The article can be saved in the database as follows:
–
only under one PLU number
– under a fixed combination of PLU and customer number
The configuration of the database is not subject of this documentation.
For further information please contact your Bizerba consultant or Bizer-
ba Service.
Mode level: 1 or 2
Mode level 1: <PLU>
or
Mode level 2: <Article data> / <PLU>
Recording PLU number, see page 77.
Record PLU number, if available, see page 77.
Press <OK>.
The number of the article appears on the softkey <PLU>. The article is used as of the next
labeling
.