Label data Instruction manual GLM-I
204 38.019.129.001 en
18
If you set a different label layout, you have to insert a suitable label roll.
Mode level: 1 or 2
Mode level 1: <Etc> / <Labels> / <Label type>
or
Mode level 2: <Labels> / <Label type>
Select and confirm label type.
Select and confirm label type.
The description of the currently set label layout appears on the softkey.
18.3 Select label size for standard labels
If you are using different label sizes, you can select the label size for the standard label.
The label size determines the height of text field 2
(PLU and ingredient text).
The following label sizes can be used in combination with standard labels:
Bizerba ISB
Size 68 mm 58 mm 37 mm 33 mm 68 mm 50 mm
1 32 33 46 47 41 43
2 38 38 52 52 46 48
3 45 43 58 57 55 53
4 55 53 68 67 65 62
5 61 60 74 74 71 70
6 - 75 - 90 - 85
7 - 93 - 107 - 103
The label size is usually managed in label parameter tables and called up together with the
PLU. This is where you can change the size of the label for the current labeling job
.
Mode level: 1 or 2
Mode level 1: <Etc> / <Labels> / <Label size>
or
Mode level 2: <Labels> / <Label size>
Press softkey with respective size.
After changing the size of the label, select a suitable label roll.
To Next Page
Loading...
Need help?
General
