Bizerba GLM-I - Edit Softkeys in Mode Level T; Display Softkey Properties

Instruction manual GLM-I Customer specific functions
38.019.129.001 en 123
10
10.7.3 Edit softkeys in mode level T
The following functions are available:
– Delete soft key, see page 123.
– Block softkey, see page 123.
– Activate softkey, see page 123.
Key programming is approved, see page 102.
Delete copied softkey
Press <2nd.> and <Record>.
Press the softkey you want to delete.
Select and confirm "Delete softkey".
Block the copied softkey
Press <2nd.> and <Record>.
Press the softkey you want to block.
Select and confirm "Deactivate softkey".
The blocked softkey is gray and cannot be used.
Reactivate blocked softkey
Press <2nd.> and <Record>.
Press the blocked softkey.
Select and confirm "Activate softkey".
The softkey is available again for use.
10.7.4 Display softkey properties
You can display the following softkey properties in mode level T:
–
Position of softkey in menu
– Type of softkey (lower level/copied softkey)
– Activation status (active/passive)
Press <2nd.> and <Record>.
To show a softkey's properties, simply press the softkey.
Select and confirm "Show softkey properties".