Instruction manual GLM-I Codes and scanning rules
38.019.129.001 en 233
19
19.7.3 Industrial code
The data structure of industrial codes can be selected as you wish. For the evaluation
process, it must be known how the data are to be interpreted. A legible optical character
row is not stipulated for industry codes.
19.7.4 Logistics codes ITF-14
The ITF-14 is displayed by characters in Code2/5 interleaved. Only numeric data can be
encoded.
Suggestions for code structure rule in ITF
-14
ITF16: Constant{xxx}, code substr.1{12-digit}
ITF Add on: Weight{5-digit, decimal place, intern}
x: Dispatch unit number
xxx: Space plus two-digit number for dispatch unit
19.7.5 Logistics codes Maxicode
A maxicode is almost square and has a fixed size with a small tolerance range. Because
of its square form, it is not output rotated. The printout is only allowed with 8
-dot bars and
12-dot bars. The Module width is not evaluated.
To Next Page
Loading...
