Codes and scanning rules Instruction manual GLM-I
246 38.019.129.001 en
19
Selecting data format
After inserting data elements the selection list
"Date format" appears. The following set-
tings are possible:
"DD.MM.YY": Day. Month. Year.
"YY.MM.DD": Year. Month. Day.
"MM.DD.YY": Month. Day. Year.
"DD.MM.YYYY": Day. Month. Year.
"YYYY.MM.DD": Year. Month. Day.
"MM.DD.YYYY": Month. Day. Year.
"DDMM": Day. Month.
"MM.DD": Month. Day.
"YY": Year.
"YYYY": Year.
"DD": Day.
"MM": Month.
"Day o. year": Consecutively numbered day of year, 3 digits.
"Calendar week": Calendar week, 2 digits.
"Hrs. Min.": Time in hours and minutes, each 2 digits
"Hours": Time in hours, 2 digits
"Min.": Time in minutes, 2 digits
Select date format and confirm.
In the code structure the data format appears in brackets behind the date element.
Entering decimal places for text elements
After insertion of text contents a window appears for entering the decimal places. You can
enter any decimal place for the text element
.
Enter decimal place and confirm.
In the code structure the decimal place appears in brackets behind the text element.
Entering offset for text number
After insertion of a text number a window appears for entering the offsets. The entered off-
set is added to the scanned text number
.
Example: Scanning result = 100; Offset = 1000 ⇒ Text number = 1100
Enter offset and confirm.
In the code structure the offset appears in brackets behind the text element.
To Next Page
Loading...
Need help?
General
