Display and operating unit Instruction manual GLM-I
82 38.019.129.001 en
7
Use the search function in tables
<Search>
Via this key you have access to a search function in numerous
tables that you can use to look for table entries.
The following search modes are provided:
"Fragment": Search for table entries that contain the specified search text.
"Beginn. of word": Search for table entries that begin with the specified search
text.
The search function does not distinguish between large and small let-
ters.
A table has been opened.
Mark the table columns you want to search through. If you want the search to start in
a specific table cell
, mark this cell.
Press the <Search> key in the table.
A search window opens.
Select the search mode.
Depending on the search mode, enter the beginning of part of the table entry you are
searching for into the "Search
" field.
Press <Continue search>.
In the "found" field, you will see the first table entry that corresponds to your search
criteria.
If necessary, press <Continue search> again until the table entry you are searching
for appears in the "found" field
.
Close the search window via < >.
The table entry you searched for is highlighted.
To Next Page
Loading...
Need help?
General
