Texts Instruction manual GLM-I
178 38.019.129.001 en
15
Static texts are saved in text tables. Depending on the configuration, a text table can con-
tain up to 50 static texts to be printed on customer labels
. Static text tables are saved un-
der parameter numbers in the database. You can allocate these tables to PLU data or ac-
cess them directly for labeling you are currently working on.
Once you have opened a static text table, you can edit the individual texts for the current
labeling job.
Allocation of static texts to text fields on customer-specific labels is han-
dled by a layout program
, such as Bizerba Label Designer (BLD) or the
label layout editor in GT-SoftControl. You can find more information in
the introduction to the program you decide to use.
The following functions are available:
–
Open table of static texts in order to edit, see page 179.
– Edit static text table, see page 179.
– Save static text table, see page 180.
– Close static text table, see page 180.
– Delete static text table , see page 180.
– Open static text table for current labeling job, see page 181.
– Edit static texts for current labeling job, see page 181.
To Next Page
Loading...
Need help?
General
