Bizerba GLM-I - Enter or change the code substring for the current labeling job

Instruction manual GLM-I Codes and scanning rules
38.019.129.001 en 225
19
Special input field Description
"Correction level" PDF417 code:
Enter adjustment level (1
-8).
The higher the level, the more errors are corrected. In level 0,
errors are detected but not corrected.
"Lines, columns" Data Matrix Code:
Enter the exterior shape of the 2D code and the number of
rows and columns
.
"Quadr. Auto": Square shape in accordance with
the selected number of characters
"Rectangle Auto": Oblong shape in accordance with
the selected number of characters
"10x10:" Select number of rows and col-
umns for square shape.
Possible settings:
10x10, 12x12, 14x14, 16x16,
18x18, 20x20, 22x22, 24x24,
26x26, 32x32, 36x36, 40x40,
44x44, 48x48, 52x52, 64x64,
72x72, 80x80, 88x88, 96x96,
104x104, 120x120, 132x132,
144x144.
"8x18:" Select the number of rows and col-
umns for oblong shape.
Possible settings:
8x18, 8x32, 12x26, 12x36, 16x36,
16x48.
Enter special input
The code editor is opened.
Press <Special inputs>.
The special input options pertaining to the code type you are using appear.
Enter your input or make changes, see page 224.
Quit the window with <Enter>.