Totals Instruction manual GLM-I
298 38.019.129.001 en
22
"Deduct from attrib.area": If required, define here too which totals should be deducted due
to returned goods.
The following settings are possible
:
– "no key attribute"
– "PLU"
– "Customer number"
In the standard setting "no key attribute" no deductions are
made.
"Ded.da.rec.fr.attrib.val.": If you have preset either "PLU" or "Customer number" for sub-
traction in the previous line, enter one of these numbers here
thereby specifying the total to be deducted as returned goods.
Deduction of returned goods takes place as described for a to-
tal evaluation, see page 306.
Mode level: 2
<Release total> / <Etc> / <Printout: *A > 0>
Make settings and close table, see page 85.
To print the totals confirm the security query with <yes>.
To Next Page
Loading...
