Bizerba GLM-I User Manual

Instruction manual GLM-I Maintenance
38.019.129.001 en 387
28
Activity Interval Cleaning agent/
lubricant
Rotary arm labeler Labeling chute: Spray soiling
with sufficient label remover
.
Leave it to soak in well and re-
move the label residues by
hand or with a cloth.
Daily Label remover,
95943000000
Clean and lubricate roller
track.
Daily Label remover,
95943000000
Oil, 96001740000
Rotary arm labeler Replace rotary arm labeler. 4 weeks –
Piston labeler Clean suction plate, gripper. Daily Label remover,
95943000000
Turn suction piston. 4 weeks –
Belt labeler Replace pressure roller. 6 weeks –
Clean deflecting plate, suction
plate, gripper.
Daily Label remover,
95943000000
Belt labeler Clean jet. If dirty Label remover,
95943000000
Protection and safety devices
Activity Interval Cleaning agent/lu-
bricant
Optional:
EMERG-OFF button, contactor, relay, safety
switch: Check function. Trigger EMERG-
OFF intentionally outside production
.
Weekly –
Belt modules
Activity Interval Cleaning agent/lu-
bricant
Clean, replace belt. After soiling/wear
and tear
Water with standard
cleaning agents
Papst-Zeitlauf, Maxon: Replace motors. 1.5 years –

Bizerba GLM-I Specifications

General

Brand	Bizerba
Model	GLM-I
Category	Label Maker
Language	English