Bizerba GLM-I - Label dispenser

Accessories Instruction manual GLM-I
434 38.019.129.001 en
31
The V belts of the device have to be activated by the Bizerba service once.
Illustration 86: V belt, side view
1
Adjustment unit with crank handle
2
Front part of V belt
3
Tilt lever for belt change
4
Back part of V belt
The belt inclination of the front
2
and back
4
part of the V belt can be individually adjus-
ted. For this reason, each V belt is provided with two adjustment units
1
:
–
Left adjustment unit for inclination of V belt front part
2
–
Right adjustment unit for inclination of V belt back part
4