Bizerba GLM-I User Manual

Instruction manual GLM-I Labeling systems
38.019.129.001 en 53
6
The package must stand firmly on the outer belts. This ensures a
smooth transport via label opening
.
Illustration 18: Setting belt distance
Symmetrical adjustment of belts
Adjust rotary knob A and B by the same value.
Adjust belt in back
Adjust rotary knob A by the respective value.
Adjust front belt
Adjust rotary knob A by the respective value.
Turn labeler by 90 degrees
Illustration 19: Turning labeler
Pull out labeling system completely at
grip handles
2
.
Pull the spherical printhead
1
and turn
the labeling system in direction of arrow
.
Release spherical printhead
1
and con-
tinue turning labeling system until print-
head engages
.
Insert labeling system completely at grip
handle
2
.
Chang label roll
To change the label roll turn out the labeling system completely out of conveyor frame and
turn it, if needed. The label roll is changed in analog to master labeler
, see page 58.

Bizerba GLM-I Specifications

General

Brand	Bizerba
Model	GLM-I
Category	Label Maker
Language	English