Instruction manual GLM-I Display and operating unit
38.019.129.001 en 67
7
<One-line>
Hide additional keys
.
<Information>
Display verification information
:
– "Software ID": Display information on software, see
page 128.
– "Log software update": Display logbook of software up-
dates, see page 129.
– "Teach history": Display logbook of teaching processes.
This function is only required for devices that are used as
control scales.
– "Maximum belt speed": Display max. belt speed, see
page 129.
– "Operating hours": Display operating hours, see page 130.
– "History of messages": Display history of messages, see
page 129.
– "Search softkey": Search for a softkey, see page 73.
<Clear>
–
View error messages.
– Deactivate a function in a table.
– For entries delete text.
<Home>
Change to main menu
.
<Back>
Move backwards in menu tree or backwards through tables
. Af-
ter switching on the device or after a change of the mode level
<Back> is without function.
<Enter>
Confirm entry. If the screen shows a menu underneath the main
menu: switch to next menu level
.
<Etc>
Scroll forward or backward in multi
-side menus. If scrolling is
possible, symbol <>> or <<> can be found in the status line.
<ID>
Displaying system bus address of device and device name
, if
necessary. Click on field to access the GT-SoftControl level.
The operation of GT-SoftControl is not subject of this documentation.
Read the operating instructions on GT
-SoftControl.
To Next Page
Loading...
